Product categories

More »

Stainless Steel

Stainless Steel specifications held in the austenitic, martensitic and precipitation hardening varieties. Stocks are held in British Standard and International standards. Below is listed our most commonly supplied grades; please contact our sales office. Also stock is 301 stainless spring temper rolled strip.

Hi-Steel HSLA-80

Hi - Speed, high Speed Steel Tool Steel (made) : highly processed into the Tool Steel, carbon content high, while containing cr quantity is low (about 4%), reason burnish of Steel surface gloss darker, after heat can reach by HRc62 high hardness, resistance to rust performance not on a roll.

Mould Steel

Steel mould and Steel mould suppliers, global delivery, stock supply Steel mould steels.

Heat Resistant Steel

Heat resistant steel. AS Orlov Izobret. Mashinostr. 3, 48-49, 7/2000. The purpose of this work was to increase plasticity of heat resistant steel after aging at the 500-1300 deg C temperature and to improve its operational reliability.

Tool Steel

Comprehensive stocks held of tool steel, including hot work, cold work and plastic mould tool steel specifications. Below we detail our most common grades. Other British Standard and international special steels and tool steels are also available, please contact our sales office.

Ball Bearing Steel

Supplies Ball bearing steel of all types, along with carbon steel and specialty balls, to OEM's around the world. Also offers platinum balls, brass balls, gold, titanium, aluminum, carbon and plastic balls.

Spring Steel

Carbon spring steel is held in a wide range of sizes. Detailed below are our most common specifications. Carbon steel strip and spring steel sheet is available most commonly in the hardened and tempered condition, though certain sizes are available in the annealed condition. Round and flat bar is stocked in the as rolled condition. Most spring steel specifications are held to British Standard steel specifications including BS1449 & BS970.

Alloy and Carbon Steel

Alloy steel is steel alloyed with a variety of elements in total amounts of between 1.0% and 50% by weight to improve its mechanical properties. Alloy steels are broken down into two groups: low alloy steels and high alloy steels. The difference between the two is somewhat arbitrary: Smith and Hashemi define the difference at 4.0%, while Degarmo, et al., define it at 8.0 %.[1][2] Most commonly, the phrase "alloy steel" refers to "low alloy" steels.

News

More »

Enterprise email

Home » Stainless Steel » Product introduction

5Cr 0.5Mo Stainles Steel

  • Numbers: 2011092132
  • Model: 5Cr 0.5Mo
  • Producers: China
  • Update time: 2011.09.22
  • Browse:

Product Description:

 
ASTM A213 T5 5Cr-0.5Mo steel TUBES FOR BOILERS AND HEAT EXCHANGERS (STBA 25)
Categories: Metal; Ferrous Metal; ASTM steel

Material Notes: Creep and rupture data provided by NIMS

Key Words: JIS G3462 STBA 25; ISO 2604 II S37; BS 3606 625; UNS K41545

Mechanical Properties Metric English Comments
Tensile Strength, Ultimate  415 MPa 60200 psi
Tensile Strength, Yield  215 MPa 31200 psi
Elongation at Break  30.0 % 30.0 %
Rupture Strength 28.0 - 31.0 MPa
@Temperature 600 °C,
Time 100000 hour
4060 - 4500 psi
@Temperature 1110 °F,
Time 100000 hour
  39.0 - 43.0 MPa
@Temperature 575 °C,
Time 100000 hour
5660 - 6240 psi
@Temperature 1070 °F,
Time 100000 hour
  54.0 - 60.0 MPa
@Temperature 550 °C,
Time 100000 hour
7830 - 8700 psi
@Temperature 1020 °F,
Time 100000 hour
  73.0 - 80.0 MPa
@Temperature 525 °C,
Time 100000 hour
10600 - 11600 psi
@Temperature 977 °F,
Time 100000 hour
  94.0 - 107 MPa
@Temperature 500 °C,
Time 100000 hour
13600 - 15500 psi
@Temperature 932 °F,
Time 100000 hour
 
Component Elements Properties Metric English Comments
Carbon, C  <= 0.15 % <= 0.15 %
Chromium, Cr  4.0 - 6.0 % 4.0 - 6.0 %
Iron, Fe  92.05 - 95.25 % 92.05 - 95.25 %
Manganese, Mn  0.30 - 0.60 % 0.30 - 0.60 %
Molybdenum, Mo  0.45 - 0.65 % 0.45 - 0.65 %
Phosphorous, P  <= 0.025 % <= 0.025 %
Silicon, Si  <= 0.50 % <= 0.50 %
Sulfur, S  <= 0.025 % <= 0.025 %

Users viewing this material also viewed the following:
ASTM A213 T9 9Cr-1Mo steel TUBES FOR BOILERS AND HEAT EXCHANGERS (STBA 26)
ASTM A213 T22 2.25Cr-1Mo steel FOR BOILER AND HEAT EXCHANGER SEAMLESS TUBES (STBA 24)
ASTM A213 T2 Alloy steel, Chromium Molybdenum
ASTM A213 T12 Alloy steel, Chromium Molybdenum
ASTM A387 GRADE 12 Alloy steel, Chromium Molybdenum
 

 
Product description:
Step Shaft 5Cr 0.5Mo       Tube 5Cr 0.5Mo       Pie-shaped 5Cr 0.5Mo       Ring 5Cr 0.5Mo        Module Large valves of the main 5Cr 0.5Mo        Other Profiled forgings 5Cr 0.5Mo     
Special Steel classification:
Stainless steel, Hi-Steel HSLA-80, Mould steel,  Heat resistant steel, Tool steel, Ball bearing steel,Spring steelAlloy steel,  Construction steel,  Die steel, High-speed steel,  angles, channels, H steel, I-beams, welded pipes, seamless tubes,
Standard:
Our products meet Chinese GB, Japanese JIS, US ASTM, UK BS, EU DIN standards and so on.
Our advantages:
Our advantages such as advanced management and operation concepts, suitable work facilities, highly qualified talents and a number of trade partners who have long-term and close cooperation with us have ensured us to provide global customers with competitive high-quality commodities and excellent services, quickly, accurately, conveniently and completely.
Products Introduction:
Specifications
Round bar:
Diameter : 1mm-2000mm
Square bar:
Size:  50mm * 50mm-600mm *600mm
Plate steel/flat bar:
Size: Thickness:  0.1mm-800mm Width: 10mm to 1500mm
Tube/pipe:
Size: OD:  6-219mm  WT: 1-35 mm.
Cold-rolled sheet: Thickness:  2-5mm Width:1000mm Length: 2000mm
Hot-rolled sheet: Thickness:6-80mm Width: 210-610mm
Length:  We can supply any length based on the customer's requirement.
Forging/hot rolling/ extrusion of steel.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Finished goods condition:  hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions:  scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing:  electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection:  100% ultrasonic inspection for any inperfections or based on the customer's requirement
Excellent service for all kinds of industries, with advantages of technologies,  equipment and price.
We serve you with our honesty,  integrity,  and professionality.

Stainless Steel Suppliers | Hi-Steel HSLA-80 | Steel mould | Heat resistant steel | Tool Steel | Ball bearing steel | Spring steel | Alloy

Copyright 2003 - 2011 China longhai special steel Co., LTD is mainly engaged in all kinds of stainless steel 630 production, wholesale, retail enterprises

TEL:+86-13880247006 | FAX:+86-816-3639422 | E-mail:sales@specialsteel-jy.com | Add:119#,Jiangdong road, Sanhe Town,Jiangyou City, Sichuan Province, China | Zip:621701