Product Description:

High Tensile Steel

EN26 High Tensile Steel

EN26 is a 2.5% nickel chromium molybdenum high tensile steel, usually supplied hardened and tempered to either 'V' or 'W' condition. EN26  is suitable for applications which require higher tensile and yield strength than EN26 or EN25 specifications. EN26 round bar is available from stock. When required EN26 can be induction or flame hardened. EN26 can also be nitrided.

 Chemical Composition:

TYPICAL ANALYSIS			EN26
C.	Si.	Mn	Ni.	Cr.	Mo.
0.40%	0.30%	0.60%	2.50%	0.75%	0.55%

Heat Treatment	Tensile Strength Rm N/mm²	Yield Stress Re N/mm²	a% on 5.665ÖSo	Impact Izod J	Impact KCV J	Proof Stress rp0.2	Hardness HB	Size mm
V	1000/1150	835	12	34	28	820	293/352	>29≤250
V	1000/1150	850	12	47	42	835	293/352	>29≤150
W	1075/1225	925	11	27	22	910	311/375	>29≤250
W	1075/1125	940	11	40	35	910	311/375	>29≤250

Forging
Heat to 1150 to 1200°C and hold at temperature until throughly soaked and suitable to forge. Do not forge below 850°C.

Heat Treatment
To harden EN26 first heat the component to 820 to 850°C and hold at temperature until throughly soaked. Quench the EN26 component in oil, water or polymer as required. EN26 can be flame or induction hardened to achieve a high surface hardness.

Tempering
To temper EN26 heat the component to the required tempering temperature (450 to 660°C), thoroughly soak for 1 hour per 25mm thickness of section, cool in air.

Nitriding
EN26 can be nitrided to give a surface hardness of up to 60HRc. Heat to 500 to 530°C and hold for sufficient time to develop the case depth required, no quenching is required.

Stress Relieving
To stress relieve EN26 heat the component to 640 to 660°C and hold until temperature is uniform through the section. Soak the EN26 component for 1 hour per 25mm thickness of section and cool in air.

 
Product description:

Step Shaft  EN26 Tube EN26  Pie-shaped EN26  Ring  EN26 Module  Large valves of the main EN26  Other Profiled forgings EN26

Special Steel classification:

Stainless steel, Hi-Steel HSLA-80, Mould Steel,  Heat resistant steel, Tool steel, Ball bearing steel,Spring steel,  Alloy steel,  Construction steel,  Die steel, Mould steel,angles, channels, H steel, I-beams, welded pipes, seamless tubes,

Standard:
Our products meet Chinese GB, Japanese JIS, US ASTM, UK BS, EU DIN standards and so on.

Our advantages:

Our advantages such as advanced management and operation concepts, suitable work facilities, highly qualified talents and a number of trade partners who have long-term and close cooperation with us have ensured us to provide global customers with competitive high-quality commodities and excellent services, quickly, accurately, conveniently and completely.

Products Introduction:

Specifications

Round bar:
Diameter : 1mm-2000mm

Square bar:
Size:  50mm * 50mm-600mm *600mm

Plate steel/flat bar:
Size: Thickness:  0.1mm-800mm Width: 10mm to 1500mm

Tube/pipe:
Size: OD:  6-219mm  WT: 1-35 mm.

Cold-rolled sheet: Thickness:  2-5mm Width:1000mm Length: 2000mm

Hot-rolled sheet: Thickness:6-80mm Width: 210-610mm

Length:  We can supply any length based on the customer's requirement.

Forging/hot rolling/ extrusion of steel.

Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes

Finished goods condition:  hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement

Surface conditions:  scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement

Furnaces for metallurgical processing:  electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.

Ultrasonic inspection:  100% ultrasonic inspection for any inperfections or based on the customer's requirement

Excellent service for all kinds of industries, with advantages of technologies,  equipment and price.

We serve you with our honesty,  integrity,  and professionality.