Product categories

More »

Stainless Steel

Stainless Steel specifications held in the austenitic, martensitic and precipitation hardening varieties. Stocks are held in British Standard and International standards. Below is listed our most commonly supplied grades; please contact our sales office. Also stock is 301 stainless spring temper rolled strip.

Hi-Steel HSLA-80

Hi - Speed, high Speed Steel Tool Steel (made) : highly processed into the Tool Steel, carbon content high, while containing cr quantity is low (about 4%), reason burnish of Steel surface gloss darker, after heat can reach by HRc62 high hardness, resistance to rust performance not on a roll.

Mould Steel

Steel mould and Steel mould suppliers, global delivery, stock supply Steel mould steels.

Heat Resistant Steel

Heat resistant steel. AS Orlov Izobret. Mashinostr. 3, 48-49, 7/2000. The purpose of this work was to increase plasticity of heat resistant steel after aging at the 500-1300 deg C temperature and to improve its operational reliability.

Tool Steel

Comprehensive stocks held of tool steel, including hot work, cold work and plastic mould tool steel specifications. Below we detail our most common grades. Other British Standard and international special steels and tool steels are also available, please contact our sales office.

Ball Bearing Steel

Supplies Ball bearing steel of all types, along with carbon steel and specialty balls, to OEM's around the world. Also offers platinum balls, brass balls, gold, titanium, aluminum, carbon and plastic balls.

Spring Steel

Carbon spring steel is held in a wide range of sizes. Detailed below are our most common specifications. Carbon steel strip and spring steel sheet is available most commonly in the hardened and tempered condition, though certain sizes are available in the annealed condition. Round and flat bar is stocked in the as rolled condition. Most spring steel specifications are held to British Standard steel specifications including BS1449 & BS970.

Alloy and Carbon Steel

Alloy steel is steel alloyed with a variety of elements in total amounts of between 1.0% and 50% by weight to improve its mechanical properties. Alloy steels are broken down into two groups: low alloy steels and high alloy steels. The difference between the two is somewhat arbitrary: Smith and Hashemi define the difference at 4.0%, while Degarmo, et al., define it at 8.0 %.[1][2] Most commonly, the phrase "alloy steel" refers to "low alloy" steels.

News

More »

Enterprise email

Home » Stainless Steel » Product introduction

310S Stainless Steel

  • Numbers: 2011071907
  • Model: 310S
  • Producers: China
  • Update time: 2011.07.19
  • Browse:

Product Description:

Stainless steel

310S Stainless Steel

SPECIFICATIONS
ASTM A312, A403, A182
ASME SA312, SA403, SA182

Chemical Composition

C
Cr
Mn
Mo
Ni
P
S
Si
Max
 
Max
Max
 
Max
Max
Max
.08
24.0-26.0
2.0
0.75
19.0-22.0
0.045
0.03
0.75

 

DESCRIPTION
310S has excellent resistance to oxidation under constant temperatures to 2000 deg. F. Cyclic conditions reduce its oxidation resistance, and a maximum operating temperature of 1900 deg.F. is generally recommended if cycling is involved. Having a lower coefficient of expansion than most 300 Stainless steels, 31OS may be used in operations involving moderately severe thermal cycling, such as rapid air cooling. It is not usually recommended for liquid quenching. Although 310S has less resistance to absorption of carbon and nitrogen than the higher alloys such as 330 and 333, it is widely used in moderately carburizing atmospheres such as encountered in petro-chem plants. Because of its high chromium and medium nickel contents, 310S may be used in atmospheres containing moderate amounts of sulfur.
DESIGN FEATURES
• Austenitic Stainless steel with excellent high
temperature oxidation resistance.
• Good for continuous exposure to 2100 deg.F. intermittent service to 1900 deg.F.
• Better elevated temperature creep strength than the 18-8 grades.
• Good resistance to both carburizing and reducing environments.
• General corrosion resistance better than Types 304 and 309.
• May be susceptible to chloride stress corrosion cracking.
• Availability.
• Ease of fabrication.
TYPICAL APPLICATIONS
Heat exchanger and heat recuperator tubing
Molten salt applications
Sulfur bearing gas atmospheres

TENSILE REQUIREMENTS

Tensile Strength (KSI) 75
Yield Strength (KSI) 30

KSI can be converted to MPA (Megapascals) by multiplying by 6.895
 
 
Product description:
Step Shaft 310S   Tube 310S   Pie-shaped 310S   Ring 310S    Module Large valves of the main 310S    Other Profiled forgings 310S 
Special Steel classification:
Stainless steel, Hi-Steel HSLA-80, Mould steel,  Heat resistant steel, Tool steel, Ball bearing steel,Spring steelAlloy steel,  Construction steel,  Die steel, High-speed steel,  angles, channels, H steel, I-beams, welded pipes, seamless tubes,
Standard:
Our products meet Chinese GB, Japanese JIS, US ASTM, UK BS, EU DIN standards and so on.
Our advantages:
Our advantages such as advanced management and operation concepts, suitable work facilities, highly qualified talents and a number of trade partners who have long-term and close cooperation with us have ensured us to provide global customers with competitive high-quality commodities and excellent services, quickly, accurately, conveniently and completely.
Products Introduction:
Specifications
Round bar:
Diameter : 1mm-2000mm
Square bar:
Size:  50mm * 50mm-600mm *600mm
Plate steel/flat bar:
Size: Thickness:  0.1mm-800mm Width: 10mm to 1500mm
Tube/pipe:
Size: OD:  6-219mm  WT: 1-35 mm.
Cold-rolled sheet: Thickness:  2-5mm Width:1000mm Length: 2000mm
Hot-rolled sheet: Thickness:6-80mm Width: 210-610mm
Length:  We can supply any length based on the customer's requirement.
Forging/hot rolling/ extrusion of steel.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Finished goods condition:  hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions:  scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing:  electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection:  100% ultrasonic inspection for any inperfections or based on the customer's requirement
Excellent service for all kinds of industries, with advantages of technologies,  equipment and price.
We serve you with our honesty,  integrity,  and professionality.

 

C
Cr
Mn
Mo
Ni
P
S
Si
Max
 
Max
Max
 
Max
Max
Max
.08
24.0-26.0
2.0
0.75
19.0-22.0
0.045
0.03
0.75

Stainless Steel Suppliers | Hi-Steel HSLA-80 | Steel mould | Heat resistant steel | Tool Steel | Ball bearing steel | Spring steel | Alloy

Copyright 2003 - 2011 China longhai special steel Co., LTD is mainly engaged in all kinds of stainless steel 630 production, wholesale, retail enterprises

TEL:+86-15328239557 | FAX:+86-816-3639422 | E-mail:sales@specialsteel-jy.com | Add:119#,Jiangdong road, Sanhe Town,Jiangyou City, Sichuan Province, China | Zip:621701