Product categories

More »

Stainless Steel

Stainless Steel specifications held in the austenitic, martensitic and precipitation hardening varieties. Stocks are held in British Standard and International standards. Below is listed our most commonly supplied grades; please contact our sales office. Also stock is 301 stainless spring temper rolled strip.

Hi-Steel HSLA-80

Hi - Speed, high Speed Steel Tool Steel (made) : highly processed into the Tool Steel, carbon content high, while containing cr quantity is low (about 4%), reason burnish of Steel surface gloss darker, after heat can reach by HRc62 high hardness, resistance to rust performance not on a roll.

Mould Steel

Steel mould and Steel mould suppliers, global delivery, stock supply Steel mould steels.

Heat Resistant Steel

Heat resistant steel. AS Orlov Izobret. Mashinostr. 3, 48-49, 7/2000. The purpose of this work was to increase plasticity of heat resistant steel after aging at the 500-1300 deg C temperature and to improve its operational reliability.

Tool Steel

Comprehensive stocks held of tool steel, including hot work, cold work and plastic mould tool steel specifications. Below we detail our most common grades. Other British Standard and international special steels and tool steels are also available, please contact our sales office.

Ball Bearing Steel

Supplies Ball bearing steel of all types, along with carbon steel and specialty balls, to OEM's around the world. Also offers platinum balls, brass balls, gold, titanium, aluminum, carbon and plastic balls.

Spring Steel

Carbon spring steel is held in a wide range of sizes. Detailed below are our most common specifications. Carbon steel strip and spring steel sheet is available most commonly in the hardened and tempered condition, though certain sizes are available in the annealed condition. Round and flat bar is stocked in the as rolled condition. Most spring steel specifications are held to British Standard steel specifications including BS1449 & BS970.

Alloy and Carbon Steel

Alloy steel is steel alloyed with a variety of elements in total amounts of between 1.0% and 50% by weight to improve its mechanical properties. Alloy steels are broken down into two groups: low alloy steels and high alloy steels. The difference between the two is somewhat arbitrary: Smith and Hashemi define the difference at 4.0%, while Degarmo, et al., define it at 8.0 %.[1][2] Most commonly, the phrase "alloy steel" refers to "low alloy" steels.

News

More »

Enterprise email

Home » Stainless Steel » Product introduction

317L Stainless Steel

  • Numbers: 2011072117
  • Model: 317L
  • Producers: China
  • Update time: 2011.07.21
  • Browse:

Product Description:

UNS S31703
Chemical Composition, %
Ni
Cr
Mo
Mn
Si
11.0 - 15.0
18.0 - 20.0
3.0 - 4.0
2.0 Max
.75 Max
C
N
S
P
Fe
0.03 Max
0.1 Max
0.03 Max
0.045 Max
Balance
317L Stainless steel Available Forms
  • Sheet
  • Plate
  • Bar
  • Pipe & Tube (welded & seamless)
  • Fittings (i.e. flanges, slip-ons, blinds, weld-necks, lapjoints, long welding necks, socket welds, elbows, tees, stub-ends, returns, caps, crosses, reducers, and pipe nipples)
  • Welding Wire and Welding Electrode
317L is a molybdenum bearing, low carbon content "L" grade austenitic Stainless Steel that provides improved corrosion resistance over 304L and 316L Stainless steels. The low carbon provides resistance to sensitization during welding and other thermal processes.
317L is non-magnetic in the annealed condition but may become slightly magnetic as a result of welding.
Corrosion Resistance
317L has excellent corrosion resistance in a wide range of chemicals, especially in acidic chloride environments such as those encountered in pulp and paper mills. Increased levels of chromium, nickel and molybdenum compared to 316L Stainless steel improve resistance to chloride pitting and general corrosion. Resistance increases with molybdenum alloy content. 317L is resistant to sulfuric acid concentrations up to 5 percent at temperatures as high as 120°F (49°C). At temperatures under 100°F (38°C) this alloy has excellent resistance to solutions of higher concentration. However, service tests are recommended to account for the affects of specific operating conditions that may affect corrosion behavior. In processes where condensation of sulfur-bearing gases occurs, 317L is much more resistant to attack at the point of condensation than conventional alloy 316. The acid concentration has a marked influence on the rate of attack in such environments and should be carefully determined by service tests.
Characteristics of 317L Stainless steel
  • Improved general and localized corrosion to 316L stainless
  • Good formability
  • Good weldability
Applications is 317L Stainless steel
  • Flue-gas desulfurization systems
  • Chemical process vessels
  • Petrochemical
  • Pulp and Paper
  • Condensers in power generation
Mechanical Properties
Minimum Specified Properties, ASTM A240

Ultimate Tensile Strength, ksi Minimum
.2% Yield Strength, ksi Minimum
Elongation Percent
Hardness Max.
75
30
35
217 Brinell
Welding 317L
317L is readily welded by a full range of conventional welding procedures (except oxyacetylene). AWS E317L/ER317L filler metal or austenitic, low carbon filler metals with molybdenum content higher than that of 317L, or a nickel-base filler metal with sufficient chromium and molybdenum content to exceed the corrosion resistance of 317L should be used to weld 317L steel.

 

Product description:

Step Shaft 317L    Tube 317L    Pie-shaped 317L    Ring 317L     Module Large valves of the main 317L     Other Profiled forgings 317L  

Special Steel classification:

Stainless steel, Hi-Steel HSLA-80, Mould steel,  Heat resistant steel, Tool steel, Ball bearing steel,Spring steelAlloy steel,  Construction steel,  Die steel, High-speed steel,  angles, channels, H steel, I-beams, welded pipes, seamless tubes,

Standard:
Our products meet Chinese GB, Japanese JIS, US ASTM, UK BS, EU DIN standards and so on.

Our advantages:

Our advantages such as advanced management and operation concepts, suitable work facilities, highly qualified talents and a number of trade partners who have long-term and close cooperation with us have ensured us to provide global customers with competitive high-quality commodities and excellent services, quickly, accurately, conveniently and completely.

Products Introduction:

Specifications

Round bar:
Diameter : 1mm-2000mm

Square bar:
Size:  50mm * 50mm-600mm *600mm

Plate steel/flat bar:
Size: Thickness:  0.1mm-800mm Width: 10mm to 1500mm

Tube/pipe:
Size: OD:  6-219mm  WT: 1-35 mm.

Cold-rolled sheet: Thickness:  2-5mm Width:1000mm Length: 2000mm

Hot-rolled sheet: Thickness:6-80mm Width: 210-610mm

Length:  We can supply any length based on the customer's requirement.

Forging/hot rolling/ extrusion of steel.

Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes

Finished goods condition:  hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement

Surface conditions:  scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement

Furnaces for metallurgical processing:  electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.

Ultrasonic inspection:  100% ultrasonic inspection for any inperfections or based on the customer's requirement

Excellent service for all kinds of industries, with advantages of technologies,  equipment and price.

We serve you with our honesty,  integrity,  and professionality.

Stainless Steel Suppliers | Hi-Steel HSLA-80 | Steel mould | Heat resistant steel | Tool Steel | Ball bearing steel | Spring steel | Alloy

Copyright 2003 - 2011 China longhai special steel Co., LTD is mainly engaged in all kinds of stainless steel 630 production, wholesale, retail enterprises

TEL:+86-15328239557 | FAX:+86-816-3639422 | E-mail:sales@specialsteel-jy.com | Add:119#,Jiangdong road, Sanhe Town,Jiangyou City, Sichuan Province, China | Zip:621701