Product Description:

Ni-base Alloy steel

Din 2.4066 Ni-base Alloy steel

Introduction
Commercially pure wrought Nickel with good mechanical properties over a wide range of temperature and excellent resistance to many corrosives, in particular hydroxides.
Good resistance to corrosion in acids and alkalis and is most useful under reducing conditions. Outstanding resistance to caustic alkalis up to and including the molten state. In acid, alkaline and neutral salt solutions the material shows good resistance, but in oxidizing salt solutions severe attack will occur. Resistant to all dry gases at room temperature and in dry chlorine and hydrogen chloride may be used in temperatures up to 550C. Resistance to mineral acids varies according to temperature and concentration and whether the solution is aerated or not. Corrosion resistance is better in de-aerated acid.

Chemical Composition:
Ni: 99.0 Min
C:≤0.15
Mn: ≤0.35
Cu: ≤0.25
S: ≤0.01
Si: ≤0.35
Fe: ≤0.40

Mechanical Properties:
Cold Worked
Ultimate Tensile Strength: 75 KSi  515 MPa Min
Yield Strength(0.2% OS): 50 KSi  345 MPa  Min
Elongation：15% min

Hot Worked
Ultimate Tensile Strength: 55 KSi  380 MPa Min
Yield Strength(0.2% OS): 15 KSi  105 MPa Min
Elongation：40% min
Applications
1.Manufacture and handling of sodium hydroxide, particularly at temperature above 300C.
2.Production of viscose rayon. Manufacture of soap.
3.Analine hydrochloride production and in the chlorination of aliphatic hydrocarbons such as benzene, methane and ethane.
4.Manufacture of vinyl chloride monomer.
5.Reactors and vessels in which fluorine is generated and reacted with hydrocarbons.

ASTM/AMS Specifications:
Bar: ATSM B160 Din 17752 BS 3076
Sheet/Plate: ASTM B162 Din 17750 BS 3072
Fitting: ASTM B366
Forging: ASTM B564
 

Product description:

Step Shaft Din 2.4066  Tube Din 2.4066  Pie-shaped Din 2.4066  Ring Din 2.4066   Module Large valves of the main Din 2.4066   Other Profiled forgings Din 2.4066

Special Steel classification:

Stainless steel, Hi-Steel HSLA-80, Mould steel,  Heat resistant steel, Tool steel, Ball bearing steel,Spring steel,  Alloy steel,  Construction steel,  Die steel, High-speed steel,  angles, channels, H steel, I-beams, welded pipes, seamless tubes,

Standard:
Our products meet Chinese GB, Japanese JIS, US ASTM, UK BS, EU DIN standards and so on.

Our advantages:

Our advantages such as advanced management and operation concepts, suitable work facilities, highly qualified talents and a number of trade partners who have long-term and close cooperation with us have ensured us to provide global customers with competitive high-quality commodities and excellent services, quickly, accurately, conveniently and completely.

Products Introduction:

Specifications

Round bar:
Diameter : 1mm-2000mm

Square bar:
Size:  50mm * 50mm-600mm *600mm

Plate steel/flat bar:
Size: Thickness:  0.1mm-800mm Width: 10mm to 1500mm

Tube/pipe:
Size: OD:  6-219mm  WT: 1-35 mm.

Cold-rolled sheet: Thickness:  2-5mm Width:1000mm Length: 2000mm

Hot-rolled sheet: Thickness:6-80mm Width: 210-610mm

Length:  We can supply any length based on the customer's requirement.

Forging/hot rolling/ extrusion of steel.

Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes

Finished goods condition:  hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement

Surface conditions:  scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement

Furnaces for metallurgical processing:  electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.

Ultrasonic inspection:  100% ultrasonic inspection for any inperfections or based on the customer's requirement

Excellent service for all kinds of industries, with advantages of technologies,  equipment and price.

We serve you with our honesty,  integrity,  and professionality.