Product Description:

Ni-base Alloy steel

ERNiCrMo-4 Ni-base Alloy Steel

Other common names: Alloy C276, Hastelloy C, Inconel® C-276
UNS Number N1027 6 ASME-SFA-5.14

ERNiCrMo-4 is a nickel-chromium-molybdenum alloy with universal corrosion resistance unmatched by any other alloy. It has outstanding resistance to a wide variety of chemical process environments including ferric and cupric chlorides, hot contaminated mineral acids, solvents, chlorine and chlorine contaminated (both organic and inorganic), dry chlorine, formic and acetic acids, acetic anhydride, sea water and brine solutions and hypochlorite and chlorine dioxide solutions. ERNiCrMo-4 also resists formation of grain boundary precipitates in the weld heat affected zone making it useful for most chemical processes in the as-welded condition. It has excellent resistance to pitting and stress corrosion cracking.
ERNiCrMo-4 sheet 0.044" thick in the heat-treated condition at 2050°F, rapid quenched, has an average olsen cup depth of 0.48". ERNiCrMo-4 can be successfully fabricated by many methods. The alloy tends to work harden but with the proper care, the alloy is readily hot and cold formed. Complete information on welding, machining and forming is available.

Chemical Composition %:
Cr: 14.5-16.5
Mn: 1.0 max
Mo: 15.0-17.0
C: 0.010 max
S: 0.08 max
Fe: 4.0-7.0
Ni: Bal
Mechanical Properties:
Tensil Strength: 100KSi  690MPa  min
Yield Strength(0.2% OS): 41KSi  283MPa
Elongation(in 2inch or 4D min,%): 40

Specificaiton:
Bar: ASTM B574 Din 17752
Sheet/Plate: ASTM B575 Din 17750
Fitting: ASTM B366
Forging: ASTM B564

ERNiCrMo-4 is a nickel-molybdenum-chromium superalloy with an addition of tungsten designed to have excellent corrosion resistance in a wide range of severe environments. The high nickel and molybdenum contents make the nickel steel alloy especially resistant to pitting and crevice corrosion in reducing environments while chromium conveys resistance to oxidizing media. The low carbon content minimizes carbide precipitation during welding to maintain corrosion resistance in as-welded structures. This nickel alloy is resistant to the formation of grain boundary precipitates in the weld heat-affected zone, thus making it suitable for most chemical process application in an as welded condition.
Although there are several variations of the Hastelloy nickel alloy, ERNiCrMo-4 is by far the most widely used.
 
ERNiCrMo-4 is widely used in the most severe environments such as chemical processing, pollution control, pulp and paper Production, industrial and municipal waste treatment, and recovery of sour natural gas.

Available Form:
Sheet , Plate , Pipe & Tube (welded and seamless) , Wire , Fittings

Corrosion Resistant
Considered one of the most versatile corrosion resistant alloys available, ERNiCrMo-4 exhibits excellent resistance in a wide variety of chemical process environments including those with ferric and cupric chlorides, hot contaminated organic and inorganic media, chlorine, formic and acetic acids, acetic anhydride, seawater, brine and hypochlorite and chlorine dioxide solutions. In addition, ERNiCrMo-4 resists formation of grain boundary precipitates in the weld heat affected zone making it useful for most chemical processes in the as-welded condition. This alloy has excellent resistance to pitting and stress corrosion cracking.

Fabrication with ERNiCrMo-4
ERNiCrMo-4 alloy can be forged, hot-upset and impact extruded. Although the alloy tends to work-harden, you can have it successfully spun, deep-drawn, press formed or punched. All of the common methods of welding can be used, although the oxyacetylene and submerged arc processes are not recommended when the fabricated item is for use in corrosion service.

ERNiCrMo-4 Welding Material
ERNiCrMo-4 welding products are used as matching composition filler material for welding C276 alloy wrought and cast products, for dissimilar welding applications including other nickel-chromium-molybdenum alloys and Stainless steels, and for weld overlay or cladding of steels.

Characteristic
1. Excellent corrosion resistance in reducing environments
2. Exceptional resistance to strong solutions of oxidizing salts, such as ferric and cupric chlorides
3. High nickel and molybdenum contents providing good corrosion resistance in reducing environments
4. Low carbon content which minimizes grain-boundary carbide precipitation during welding to maintain resistance to corrosion in heat-affected zones of welded joints
5. Resistance to localized corrosion such as pitting and stress-corrosion cracking
6. One of few materials to withstand the corrosive effects of wet chlorine gas, hypochlorite and chlorine dioxide

 

Application:
1. Digesters and bleach plants in the paper industry.
2. Components exposed to sour gas.
3. Equipment for flue-gas desulfurisation plants.
4. Evaporators, heat exchangers, filters and mixers used in sulfuric acid environments.
5. Sulfuric acid reactors.
6. Organic chloride process equipment.
7. Equipment for processes utilizing halide or acid catalysts.

Some typical applications include equipment components in chemical and petrochemical organic chloride processes and processes utilizing halide or acid catalysts. Other industry applications are pulp and paper (digesters and bleach areas), scrubbers and ducting for flue gas desulfurization, pharmaceutical and food processing equipment.
 

Product description:

Step Shaft ERNiCrMo-4  Tube ERNiCrMo-4  Pie-shaped ERNiCrMo-4  Ring ERNiCrMo-4   Module Large valves of the main ERNiCrMo-4   Other Profiled forgings ERNiCrMo-4

Special Steel classification:

Stainless steel, Hi-Steel HSLA-80, Mould steel,  Heat resistant steel, Tool steel, Ball bearing steel,Spring steel,  Alloy steel,  Construction steel,  Die steel, High-speed steel,  angles, channels, H steel, I-beams, welded pipes, seamless tubes,

Standard:
Our products meet Chinese GB, Japanese JIS, US ASTM, UK BS, EU DIN standards and so on.

Our advantages:

Our advantages such as advanced management and operation concepts, suitable work facilities, highly qualified talents and a number of trade partners who have long-term and close cooperation with us have ensured us to provide global customers with competitive high-quality commodities and excellent services, quickly, accurately, conveniently and completely.

Products Introduction:

Specifications

Round bar:
Diameter : 1mm-2000mm

Square bar:
Size:  50mm * 50mm-600mm *600mm

Plate steel/flat bar:
Size: Thickness:  0.1mm-800mm Width: 10mm to 1500mm

Tube/pipe:
Size: OD:  6-219mm  WT: 1-35 mm.

Cold-rolled sheet: Thickness:  2-5mm Width:1000mm Length: 2000mm

Hot-rolled sheet: Thickness:6-80mm Width: 210-610mm

Length:  We can supply any length based on the customer's requirement.

Forging/hot rolling/ extrusion of steel.

Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes

Finished goods condition:  hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement

Surface conditions:  scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement

Furnaces for metallurgical processing:  electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.

Ultrasonic inspection:  100% ultrasonic inspection for any inperfections or based on the customer's requirement

Excellent service for all kinds of industries, with advantages of technologies,  equipment and price.

We serve you with our honesty,  integrity,  and professionality.