Product categories

More »

Stainless Steel

Stainless Steel specifications held in the austenitic, martensitic and precipitation hardening varieties. Stocks are held in British Standard and International standards. Below is listed our most commonly supplied grades; please contact our sales office. Also stock is 301 stainless spring temper rolled strip.

Hi-Steel HSLA-80

Hi - Speed, high Speed Steel Tool Steel (made) : highly processed into the Tool Steel, carbon content high, while containing cr quantity is low (about 4%), reason burnish of Steel surface gloss darker, after heat can reach by HRc62 high hardness, resistance to rust performance not on a roll.

Mould Steel

Steel mould and Steel mould suppliers, global delivery, stock supply Steel mould steels.

Heat Resistant Steel

Heat resistant steel. AS Orlov Izobret. Mashinostr. 3, 48-49, 7/2000. The purpose of this work was to increase plasticity of heat resistant steel after aging at the 500-1300 deg C temperature and to improve its operational reliability.

Tool Steel

Comprehensive stocks held of tool steel, including hot work, cold work and plastic mould tool steel specifications. Below we detail our most common grades. Other British Standard and international special steels and tool steels are also available, please contact our sales office.

Ball Bearing Steel

Supplies Ball bearing steel of all types, along with carbon steel and specialty balls, to OEM's around the world. Also offers platinum balls, brass balls, gold, titanium, aluminum, carbon and plastic balls.

Spring Steel

Carbon spring steel is held in a wide range of sizes. Detailed below are our most common specifications. Carbon steel strip and spring steel sheet is available most commonly in the hardened and tempered condition, though certain sizes are available in the annealed condition. Round and flat bar is stocked in the as rolled condition. Most spring steel specifications are held to British Standard steel specifications including BS1449 & BS970.

Alloy and Carbon Steel

Alloy steel is steel alloyed with a variety of elements in total amounts of between 1.0% and 50% by weight to improve its mechanical properties. Alloy steels are broken down into two groups: low alloy steels and high alloy steels. The difference between the two is somewhat arbitrary: Smith and Hashemi define the difference at 4.0%, while Degarmo, et al., define it at 8.0 %.[1][2] Most commonly, the phrase "alloy steel" refers to "low alloy" steels.

News

More »

Enterprise email

Home » Alloy and Carbon Steel » Product introduction

Zeron 100 Stainless Steel

  • Numbers: 2011072118
  • Model: Zeron 100
  • Producers: China
  • Update time: 2011.07.21
  • Browse:

Product Description:

Stainless steel

Zeron 100 Super Duplex Stainless Steel

UNS S32760 F55 1.4501

Chemical Composition, %

Cr
Ni
Mo
C
W
Cu
24.0-26.0
6.0-8.0
3.0-4.0
0.030 Max
0.5-1.0
0.50-1.0
N
Mn
Si
P
S
Fe
0.2-0.3
1.00 Max
1.0 Max
0.03 Max
0.01 Max
Balance

ASTM Specifications
Pipe & Tube
Sheet/Plate
Bar
A790, A928, A789
A240
A276
Mechanical Properties
Room Temperature, Solution Annealed Condition
Tensile Strength, ksi
.2% Yield Strength, ksi
% Elongation in 50mm
Hardness Max.
109
80
25
28 HRC

Zeron 100 super duplex Stainless steel available Forms

• Sheet
• Plate
• Bar
• Pipe
• Welding Products
Zeron 100 Overview
Zeron 100, super duplex stainless steel, is a highly alloyed Stainless Steel designed for use in aggressive environments. High strength, toughness, excellent corrosion resistance and its resistance to corrosion in a wide range of organic and inorganic acids are just a few characteristics that make this duplex Stainless steel attractive to a variety of industries. Lastly, it is highly resistant to strong alkalis and resists corrosion in many non-oxidizing acids.
Usage of this super duplex Stainless steel is not recommended when it involves extended exposure to temperatures greater than 572° F. This exposure causes a substantial reduction in toughness.
Notice the chemical composition of duplex 2507 and Zeron 100 are similar however; Zeron 100 contains slightly more copper and tungsten.  The copper content (min. 0.5, max 1.0) permits excellent resistance to corrosion in many non-oxidizing and mineral acids like hydrochloric and sulfuric acid.  
What are the characteristics of Zeron 100, super duplex Stainless steel?
• Guaranteed corrosion performance (PREn ≥ 40)
• Excellent corrosion resistance in mineral acids such as hydrochloric and sulfuric
• High resistance to pitting and crevice corrosion
• Excellent resistance to stress corrosion cracking in both chloride and sour environments
• High resistance to erosion corrosion and corrosion fatigue
• Excellent mechanical properties
• Possibility for weight reduction over austenitic, standard duplex and nickel base alloys
• Good weldability

Zeron 100, super duplex Stainless steel Application
• Oil and gas industry applications
• Pollution control
• Pulp and paper
• Power generation
• Flue-gas desulfurization
• Chemical, pharmaceutical
• Desalination
• Mining and mineral industries
• Marine industries

Product description:

Step Shaft Zeron 100    Tube Zeron 100    Pie-shaped Zeron 100    Ring Zeron 100     Module Large valves of the main Zeron 100     Other Profiled forgings Zeron 100  

Special Steel classification:

Stainless steel, Hi-Steel HSLA-80, Mould steel,  Heat resistant steel, Tool steel, Ball bearing steel,Spring steelAlloy steel,  Construction steel,  Die steel, High-speed steel,  angles, channels, H steel, I-beams, welded pipes, seamless tubes,

Standard:
Our products meet Chinese GB, Japanese JIS, US ASTM, UK BS, EU DIN standards and so on.

Our advantages:

Our advantages such as advanced management and operation concepts, suitable work facilities, highly qualified talents and a number of trade partners who have long-term and close cooperation with us have ensured us to provide global customers with competitive high-quality commodities and excellent services, quickly, accurately, conveniently and completely.

Products Introduction:

Specifications

Round bar:
Diameter : 1mm-2000mm

Square bar:
Size:  50mm * 50mm-600mm *600mm

Plate steel/flat bar:
Size: Thickness:  0.1mm-800mm Width: 10mm to 1500mm

Tube/pipe:
Size: OD:  6-219mm  WT: 1-35 mm.

Cold-rolled sheet: Thickness:  2-5mm Width:1000mm Length: 2000mm

Hot-rolled sheet: Thickness:6-80mm Width: 210-610mm

Length:  We can supply any length based on the customer's requirement.

Forging/hot rolling/ extrusion of steel.

Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes

Finished goods condition:  hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement

Surface conditions:  scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement

Furnaces for metallurgical processing:  electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.

Ultrasonic inspection:  100% ultrasonic inspection for any inperfections or based on the customer's requirement

Excellent service for all kinds of industries, with advantages of technologies,  equipment and price.

We serve you with our honesty,  integrity,  and professionality.

Stainless Steel Suppliers | Hi-Steel HSLA-80 | Steel mould | Heat resistant steel | Tool Steel | Ball bearing steel | Spring steel | Alloy

Copyright 2003 - 2011 China longhai special steel Co., LTD is mainly engaged in all kinds of stainless steel 630 production, wholesale, retail enterprises

TEL:+86-15328239557 | FAX:+86-816-3639422 | E-mail:sales@specialsteel-jy.com | Add:119#,Jiangdong road, Sanhe Town,Jiangyou City, Sichuan Province, China | Zip:621701